Agri-Fab 45-03152 Manuel d'utilisateur télécharger pdf (Page 5)

TOOLS REQUIRED FOR ASSEMBLY

(2) 7/16" Wrenches

1. Assemble vinyl caps onto the ends of the R.H. and L.H.

Hitch Tubes. See ﬁ gure 1.

2. Assemble the R.H. Hitch Tube to the spreader frame

tube using two 1/4" x 2" hex bolts and 1/4" nuts.

Do not

tighten yet.

Repeat for L.H. Hitch Tube. See ﬁ gure 1.

FIGURE 1

3. Assemble the Hitch Control Tube between the Hitch

Tubes using two 1/4" x 1-3/4" hex bolts and 1/4" nuts.

Tighten all

bolts and nuts . See ﬁ gure 2.

FIGURE 2

4. Assemble the Hitch Brackets to the Hitch Control Tube

using two 1/4" x 1-3/4" hex bolts and 1/4" nuts.

Tighten

See ﬁ gure 3.

5. Assemble the hitch pin through the hitch brackets and

secure with the 1/8" hair cotter pin. See ﬁ gure 3.

6. Assemble the vinyl cap onto the Hitch Control Tube. See

ﬁ gure 4.

7. Assemble the Control Cable to the Hitch Control Tube

using the carriage bolt and nylon wing nut. See ﬁ gure

FIGURE 4

FIGURE 3

ASSEMBLY INSTRUCTIONS

1/4" x 2"

HEX BOLT

1/4" NUT

VINYL CAP

1/4" NUT

1/4" x 1-3/4"

HEX BOLT

1/4" NUT

1/4" x 1-3/4"

HEX BOLT

HAIR COTTER PIN

HITCH PIN

REMOVAL OF PARTS FROM CARTON

Remove all parts and hardware packages from the carton.

Lay out all parts and hardware and identify using the

illustrations on page 3.

CARRIAGE BOLT

NYLON

WING NUT

VINYL CAP

1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire

Agri-Fab 45-03152 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Diffuseur Agri-Fab 45-03152